Flexo Print
TL 140W/03
Flexo print TL lamps emit almost all of their light (99.9%) in the useful UVA and visible blue wavebands – between 350 and 400 nm – and have peak intensity at 370 nm (except for the /03 version). This makes them ideal for flexo printing equipment and photopolymerization processes. In addition, the ‘R’ lamps in the family have an internal 200-degree reflector to further optimize the lamp’s overall efficiency.
| Characteristic | Reprography lamps | |
| Power | 140 | W |
| Current | 1,46 | A |
| Spotlight | No | |
| Handle | G13 | |
| Bubble | T38 | |
| Operating position | Universal | |
| UV radiation | ||
| UV-A | 1 | W |
| UV-B | 0 | W |
| Dimensions | ||
| Overall length | 1500 | mm |
| Diameter | 40,5 | mm |
Warnings and Safety
A lamp breaking is extremely unlikely to have any impact on your health. If a lamp breaks, ventilate the room for 30 minutes and remove the parts, preferably with gloves. Put them in a sealed plastic bag and take it to your local waste facilities for recycling. Do not use a vacuum cleaner.
Manufacturer
Signify Poland Sp. z o. o
Aleje Jerozolimskie 195B,
02-222 Warszawa
tel: 00800 7445 4775
